Steel sliding gates
A steel electric sliding gate costs €3,000 to €5,000 installed, with the gate, the motor, the safety devices and the fitting. That is the usual range. A heavier or wider leaf, piers and extras all push it up.
What an installed steel gate costs and what to check on a quote.
Free and no obligation. Your request goes to one gate installer in your county, not a list.
- €3,000–€5,000installed
- €1,200–€2,500a motor on a gate you own
- €500–€1,500labour, often quoted apart
- €200–€600a run of mains power

What a steel sliding gate is
A frame of steel sections, filled with bars, sheet or a mix, hung on wheels or carriages and driven by a motor. Steel is strong and can be made to nearly any pattern, which is why it is the usual gate.
Steel is heavy, and the weight is what sets the motor. A leaf in solid sheet weighs more than one in open bars of the same size. Sliding gate motors.
Price your sliding gate
Two taps, then your county, and the price shows as you go. Your name and number come last, and only if you want an installer to price it.
An electric steel sliding gate, an opening of 3 to 4 m: €3,000 to €5,000.
How the price is worked out
Each figure is our range for Ireland. The gate range is the installed price of an electric sliding gate with its motor, safety devices and fitting. An aluminium gate has its own range, and so has fitting a motor to a gate you already own. With no mains power at the gate, a run of cable is added at its own range. Where a gate cannot be priced from a chair, as for timber and composite gates and for openings over 5 m, it reads priced on a visit. Use it to plan with. It isn't a quote: an installer prices yours after looking at the opening.
What the finish has to do
Steel rusts, so the finish is part of the price. Ask the installer how the gate is protected, and whether a cut or a weld on site is treated too. A gate that is painted after it is made lasts differently from one that is galvanised first, and the quote should say which.
If you would rather not paint at all, aluminium sliding gates do not rust.
What you pay
Installed, usual range
€3,000 to €5,000
Gate, motor, safety devices and fitting together.
Labour, quoted apart
€500 to €1,500
Some installers list it as a line.
A run of mains power
€200 to €600
Where there is no supply near the gate.
A yearly service
€100 to €400
Checks, lubrication and minor repairs.
What to check on the quote
- The sections. The size of the frame and what fills it.
- The finish. Galvanised, painted, or both, and how a site cut is made good.
- The motor. The make and the rating in kilograms against the weight.
- The piers. Whether they are in the price.
Other gates and parts to look at
Aluminium sliding gatesBars or slats that never rust. Installed, €4,200 to €7,500.
Wooden sliding gatesBoards in a steel frame. Priced on a visit.
Composite sliding gatesWood-look boards that need no painting. Priced on a visit.
Cantilever sliding gatesNo track on the ground. The gate hangs from carriages and needs a counterbalance behind it.
Automate a gate you ownA motor, rack and safety devices fitted to what is there. €1,200 to €2,500.- Sliding gate motorsKits from €499, by the weight of the gate
- Track and rollersWhat the gate runs on
- Safety devicesForce limits of 1,400 N and 400 N
- Power and wiringA mains run to the gate, €200 to €600
- Access controlKeypads from €120
- Faults and repairsWhy a gate stops, and who fixes it
- How wide and how much roomThe run-back beside the opening
- Building a gate yourselfWhat the law makes you responsible for
Questions before you book
How much does a steel sliding gate cost?
A steel electric sliding gate costs €3,000 to €5,000 installed, with the gate, the motor, the safety devices and the fitting. That is the usual range. A heavier or wider leaf, piers and extras all push it up.
Is steel cheaper than aluminium?
Yes. Installed and electric, steel is €3,000 to €5,000 and aluminium is €4,200 to €7,500.
Will a steel gate rust?
Steel can, which is why the finish matters. Ask what protects it and what happens to a cut made on site.
Can a steel gate be automated later?
Yes. A motor, rack and safety devices fitted to a gate you have is €1,200 to €2,500.
Does a steel gate need a track?
Many run on one, and a cantilever gate does not. Track and rollers.
Everything on this site
The gates
Costs and jobs

See the price before anyone rings
Pick the gate, the opening and the power. When you want a firm price, it goes to a single gate installer in your county.
