Sliding gates for driveways
A sliding gate for a driveway costs €3,000 to €5,000 installed in steel and €4,200 to €7,500 in aluminium. It suits a drive with room along the boundary, and a gate at a house is exempt from planning up to 2 metres.
What a drive gate costs, how much room it needs and what planning says.
Free and no obligation. Your request goes to one gate installer in your county, not a list.
- €3,000–€5,000steel, installed
- €4,200–€7,500aluminium, installed
- 2 mexempt height for a gate at a house
- €200–€600a run of mains power

Why a sliding gate suits a drive
A swing gate needs the space it sweeps. On a short drive, or one that slopes up from the road, that space is the drive. A sliding gate opens along the boundary, so the cars and the pavement stay clear.
It does need the boundary clear that far. A sliding gate needs a clear run beside the opening at least as long as the leaf. A 4 m kit gate with a 390 cm leaf needs 832 cm of total width, which is the opening plus the leaf plus about half a metre.
Price your sliding gate
Two taps, then your county, and the price shows as you go. Your name and number come last, and only if you want an installer to price it.
An electric steel sliding gate, an opening of 3 to 4 m: €3,000 to €5,000.
How the price is worked out
Each figure is our range for Ireland. The gate range is the installed price of an electric sliding gate with its motor, safety devices and fitting. An aluminium gate has its own range, and so has fitting a motor to a gate you already own. With no mains power at the gate, a run of cable is added at its own range. Where a gate cannot be priced from a chair, as for timber and composite gates and for openings over 5 m, it reads priced on a visit. Use it to plan with. It isn't a quote: an installer prices yours after looking at the opening.
What you pay
Steel, installed
€3,000 to €5,000
With a motor, safety devices and fitting.
Aluminium, installed
€4,200 to €7,500
With a motor. The top is open ended.
A run of mains power
€200 to €600
If the supply is not near the gate.
A keypad
€120 to €210
So a visitor can open it.
Planning at the front of a house
A gate within or bounding the curtilage of a house is exempt from planning permission up to 2 metres high, under Class 5 of Schedule 2 to the Planning and Development Regulations 2001. A wall or fence in front of the house is limited to 1.2 metres, and a metal palisade or other security fence is not covered.
Ask your council if the house is a protected structure or in a conservation area.
Seeing out and being seen
On a drive onto a road, think about what the driver sees as the gate opens. A leaf in open bars lets a driver see the road before the gate has fully opened. A solid one does not.
Other gates and parts to look at
Steel sliding gatesThe usual electric sliding gate. Installed, €3,000 to €5,000.
Aluminium sliding gatesBars or slats that never rust. Installed, €4,200 to €7,500.
Wooden sliding gatesBoards in a steel frame. Priced on a visit.
Composite sliding gatesWood-look boards that need no painting. Priced on a visit.
Cantilever sliding gatesNo track on the ground. The gate hangs from carriages and needs a counterbalance behind it.
Automate a gate you ownA motor, rack and safety devices fitted to what is there. €1,200 to €2,500.- Sliding gate motorsKits from €499, by the weight of the gate
- Track and rollersWhat the gate runs on
- Safety devicesForce limits of 1,400 N and 400 N
- Power and wiringA mains run to the gate, €200 to €600
- Access controlKeypads from €120
- Faults and repairsWhy a gate stops, and who fixes it
- How wide and how much roomThe run-back beside the opening
- Building a gate yourselfWhat the law makes you responsible for
Questions before you book
How much does a sliding gate for a driveway cost?
A sliding gate for a driveway costs €3,000 to €5,000 installed in steel and €4,200 to €7,500 in aluminium. It suits a drive with room along the boundary, and a gate at a house is exempt from planning up to 2 metres.
What width of drive does a sliding gate suit?
The planner offers openings up to 3 m, 3 to 4 m, 4 to 5 m and over 5 m. Over 5 m is priced on a visit. A sliding gate needs a clear run beside the opening at least as long as the leaf. A 4 m kit gate with a 390 cm leaf needs 832 cm of total width, which is the opening plus the leaf plus about half a metre.
Do I need planning permission for a driveway gate?
A gate within or bounding the curtilage of a house is exempt from planning permission up to 2 metres high, under Class 5 of Schedule 2 to the Planning and Development Regulations 2001. A wall or fence in front of the house is limited to 1.2 metres, and a metal palisade or other security fence is not covered.
Can a sliding gate open onto a road?
A sliding gate opens along your boundary, not across the road or the path. Planning rules on a gate near a road are for your council to confirm.
Do I need power at the gate?
A sliding gate motor runs off the mains, and a run of cable to the gate is €200 to €600 where there is no power near it. Electrical work in a home has to be done by a Safe Electric registered contractor, who gives you a completion certificate.
Everything on this site
The gates
Costs and jobs

See the price before anyone rings
Pick the gate, the opening and the power. When you want a firm price, it goes to a single gate installer in your county.
