Building a sliding gate yourself

You can build or fit a sliding gate yourself, and the law still puts its safety on whoever builds it. A 4 m aluminium kit with a motor is €1,728, with no posts, photocells or flashing light, and it takes about 12 hours of work.

What a kit includes, what it leaves out and what the law puts on you.

Free and no obligation. Your request goes to one gate installer in your county, not a list.

  • €1,728a 4 m kit with a motor
  • 12 hoursfor gate and motor
  • €80–€145photocells, a set
  • €200–€600a run of mains power
An open entrance between a brick pier and a gate post, onto a tree-lined paved drive

What the guidelines say

A gate built on site: the 'manufacturer' is whoever is responsible for the design and choice of components, normally the installer. A declaration of conformity must come with the gate; the technical file is kept at least ten years.

Domestic premises are outside the 2005 Act; private owners are still advised to have a gate examined by a competent person if they have concerns.

Price your sliding gate

Two taps, then your county, and the price shows as you go. Your name and number come last, and only if you want an installer to price it.

A motor for the gate you have, an opening of 3 to 4 m: €1,200 to €2,500.

Step 1 of 4

What is the gate made of?

Pick the closest. The installer asks the rest.

How the price is worked out

Each figure is our range for Ireland. The gate range is the installed price of an electric sliding gate with its motor, safety devices and fitting. An aluminium gate has its own range, and so has fitting a motor to a gate you already own. With no mains power at the gate, a run of cable is added at its own range. Where a gate cannot be priced from a chair, as for timber and composite gates and for openings over 5 m, it reads priced on a visit. Use it to plan with. It isn't a quote: an installer prices yours after looking at the opening.

What a kit leaves out

That kit has a gate, a 250 W motor, two remotes, a rack, two release keys and 8 m of rail, and it leaves out the posts, the photocells and the flashing light. Photocells are €80 to €145, and the closing edge needs safety edges at €585 to €760 for two, or another method the HSA lists.

What you cannot do yourself

  • Wire it to the mains. A Safe Electric registered contractor has to.
  • Skip the force test. The closing force has to sit under the limits.
  • Skip the paperwork. A declaration of conformity and a log of maintenance.

How to build a sliding gate

  1. Measure. The opening, the run beside it and the slope.
  2. Build the piers. With a base for the motor.
  3. Hang the leaf. On its track or carriages, running freely.
  4. Fit the motor and rack. Rated above the weight.
  5. Add the safety devices. Photocells and a safe edge, tested.
  6. Get the wiring done. By a registered contractor.

Questions before you book

Can I build my own sliding gate?

You can build or fit a sliding gate yourself, and the law still puts its safety on whoever builds it. A 4 m aluminium kit with a motor is €1,728, with no posts, photocells or flashing light, and it takes about 12 hours of work.

How do I make a sliding gate?

A frame, infill, wheels, a track or carriages, and a motor if it is to be electric. The steps are on this page.

Do I need an installer?

Nothing requires a homeowner to use one, but the safety is on whoever builds the gate, and the electrics are for a registered contractor.

How long does it take?

One kit gives about eight hours for the gate and four for the motor. Piers and a cable run are extra.

Is it cheaper than an installer?

A 4 m kit is €1,728 against €4,200 to €7,500 for an installed aluminium one, before piers, photocells and wiring.

Everything on this site

A house with a landscaped front garden and a metal gate and railings along the road

See the price before anyone rings

Pick the gate, the opening and the power. When you want a firm price, it goes to a single gate installer in your county.